Vendor Guide
Contents
Getting Started
Logging In
All vendors have been issued a specific login that when used grants access to the Vendor Management Area. This is a special area where you have the ability to manage your individual clients, run billing reports or even set up other vendor admins.
The Vendor Dashboard
The Vendor Dashboard is a little different then the client or employee dashboard. If you recall, the dashboard is the first page you are taken too upon a successful login. For the vendor, the dashboard is split into two columns. Each column contains the main areas you have access too as a vendor.
Account Types
Vendor Admins
Vendor Admins are accounts that have the ability to login to your Vendor account and make changes to client information, run billing reports, etc. You have the ability to create as many Vendor Admin accounts as you need. In order to avoid the practice of sharing login information with others, it is considered best practice to create Vendor Admin accounts whenever needed. There are two types of Vendor Admins, 1) Super Admins and 2) Admins. The difference between the two is defined below.
- Super Admins
Super Admins have full access to every area of the Vendor account. This is considered the highest level of access. They can also create other Super Admins as well as other Admins. Due to the high level of access, it is recommended that only a small number of Super Admin accounts are created. If access needs to be granted to the Vendor Area, we recommend as best practice to set-up the account as an Admin.
- Admins
Admins have the ability to create sales rep accounts as well as manage client accounts. They cannot however create other admin accounts.
Managing Vendor Admins
Once you've determined the type of Vendor Admin you wish to create (Super Admin or Admin), proceed to the administration area for that type. For demonstration purposes, we'll show how to set-up an Admin account.
- Click on "Admins" from the Main Navigation. This will take you to the Admin Administration section.
- The main Admin Administration page will list any previously set-up Admin accounts.
- If you wish to edit an existing account, click the "edit" button found on the far right hand side of the account in question.
- If you wish to create a new Admin account, click the "Create New Vendor Admins Account" button found on the page.
- Fill out the necessary fields and click the "Submit Form" button.
Sales Reps
Sales reps are used i attributing client accounts to a particular sales rep. This isn't required but if you wish to identify a sales contact with a particular client, this is a convenient way to do so.
Managing Rep Accounts
If you wish to edit or create a new Rep Account, proceed to the Rep Administration area.
- Click on "Reps" from the Main Navigation. This will take you to the Rep Administration section.
- The main Rep Administration page will list any previously set-up Rep accounts.
- If you wish to edit an existing account, click the "edit" button found on the far right hand side of the account in question.
- If you wish to create a new Rep account, click the "Create New Sales Reps Account" button found on the page.
- Fill out the necessary fields and click the "Submit Form" button.
Client Accounts
Client accounts are pretty much exactly what you might be imagining. They are the businesses/entities that you've extended a TimeMD account too for time and labor management purposes. For more information on client accounts, please refer to the section #Managing Client Accounts below.
Managing Client Accounts
Client Account Listing Page
This page lists all your existing client accounts. It also serves as the portal to various management functions related to your client accounts. By default, this page will always show your "Active" clients. If you wish to view any "In-Active" clients, you must click the "View In-Active Clients" button found towards the top of the page. To switch back to the "Active" client view, simply click the same button again to toggle back.
Below is a description of each column seen on the listing page.
Client Name
The name of the account. Below that is the sub-domain granted to the account. This is an active link. If clicked, you will be taken to the clients assigned sub-domain.
Licensing
Which licensing package you've assigned the client too.
# EE's
How many user accounts have been created. In the parentheses is the number of active accounts vs. inactive accounts. These are also an active link. If clicked, you will be taken to the billing page and it will show you any invoices generated for the client in question.
Identifier
This is the value being used in a number of areas, primarily the clients sub-domain.
Username
The client's main accounts username.
Contact
The name used when setting up the client.
Created
When the account was created.
Manage Codes button
The button is used to manage which pay codes are associated to the clients account. In nearly all cases, these codes must be matched with the codes used in your payroll software. Below the button is a link titled, "associate codes". This is used to identify how the codes will actually be used in the clients account. For more information see "Managing Client Codes".
Payroll Emails button
When clicked, this will take you to an interface where you can specify what emails should receive the payroll export file when generated.
Login As button
This button should be used whenever access to the client account is needed. This allows you to "Login As" the client and access their account directly. This is vital in order to avoid sharing the clients login information.
Edit button
This button is used to edit the clients information.
Client Account Input Page
This area is used to manage basic account information related to your client. The area is divided into eight distinct sections. Each section is described below:
General Account Information
This is where you set up basic account information. The fields used in this area are described below:
- Client Name
The name of the client as you would like it represented in TimeMD. - Identifier
How the client account will be identified in certain areas such as sub-domains. NOTE: Once the identifier has been set, it cannot be changed. No spaces, numbers or symbols can be used in the identifier, only values from the alphabet (a-z). - Status
Account status. If set to "In-active", the client will not be able to access their account nor will any of their users. - Version
For some of our legacy users, they have the option of using our legacy version of TimeMD. It is "highly" recommended that the "New" version always be used. - Sales Rep
If you have saved any Reps, they will be listed here. Otherwise you may select "General Sales" if no Reps have been entered. - Parent Account
You may associate any client account under any other client account through this field. This doesn't change the clients experience whatsoever, but is used strictly for reporting purposes. - Client Notes
Use this field if you wish to leave notes for other admins related to the client account. The client does not have access to this information. - Hide from Vendor Admin view? checkbox
Check this box if only Super Admins should have access to this account. This is helpful in circumstances where your company may be using TimeMD for it's own time tracking purposes. If checked, this would prevent your company account from appearing in the list of Client accounts when other Admins are accessing the page. - Is this a demo account? checkbox
Check this box if this account is considered a demo account. All Vendor accounts can set-up to 6 demo accounts. These accounts will not be charged. Below this checkbox you will find a total of how many demo accounts have been used.
Primary Contact Information
This is where you can set-up basic contact information for the client.
- First Name
The first name that should be used to identify the client contact. HINT: We strongly recommend not using an actual persons name in this field. Simply because you will have the opportunity to define a primary contact within the client's account itself. So what do you input? We recommend something generic such as "System" or "Client". - Last Name
The last name that should be used to identify the client contact. HINT: We strongly recommend not using an actual persons name in this field. Simply because you will have the opportunity to define a primary contact within the client's account itself. So what do you input? We recommend something generic such as "Admin" or "Account". - E-mail
The e-mail address that should be used in relation to the client account. HINT: We strongly recommend not using an actual e-mail account. Simply because you will have the opportunity to define a primary contact's e-mail within the client's account itself. So what do you input? We recommend something generic such as "systememail@noamil.com". Remember that even if the e-mail isn't real, it still needs to be unique and in the proper format. - Main Phone
The primary phone number related to the primary contact for the client. - Alt. Phone
Any alternate phone number that might be applicable for the client.
Administrator Login Information
This is where you define the client's primary login. HINT: We strongly recommend not sharing the login defined in this section with the client. You will have the opportunity to define a dedicated login from within the client's account.
- Username
The username associated to the client account. Must be unique, cannot contain spaces or non-alphanumeric characters and must be at least 6 characters in length. - Password
The password associated to the client account. It cannot contain spaces or non-alphanumeric characters and must be at least 6 characters in length.
Billing Information
Where billing invoices should be mailed too. This is intended to be used for your own internal purposes. Because TimeMD does not bill your clients directly, we do not refer to these fields with the exception of the "Begin Billing Date" field.
- Address
The address where invoices should be sent too. - City
The city as related to the address. - State
The state as related to the address. - Zip
The zip as related to the address. - Billing Cycle
How often are you going to bill your client. - Begin Billing Date
When will you begin billing your client. - Pay Method
How is your client going to pay you.
Payroll Processing Information
This is where you can define any information related to the payroll process. Because we will integrate with your payroll software of choice and depending on the software's needs, there may be specific types of questions that need to be answered in order to ensure a smooth integration. You may see different fields displayed depending on which payroll software platform is selected.
- Payroll/PEO System
The name of the software the client's export file will need to be compatible with. If for some reason the platform you are using is not listed here, please let us know. We will be happy to create an integration with your platform at no cost. - Payroll Export
Depending on the type of software being used for payroll may require different export formats. This is where you would define those. In nearly every circumstance the selection, "Pre-Built for Payroll Software Above" would be the appropriate choice.
Branding
This is where you can change the logo as well as color scheme of the pages in order to better mach the clients style and brand.
- Color Scheme
Select the color scheme most appropriate for your client. For the "New Version" you have eight choices. If using the "Legacy" version you have 13. - Logo Upload
This is where you can upload the clients logo. HINT: We strongly recommend keeping the clients logo under 200 pixels in height. This will prevent any unnecessary space from being created at the top of the page. If you need help resizing your clients logo, please let us know and we'll be happy to assist.
Misc. Settings
Various miscellaneous settings.
- Activate "paid" break tracking checkbox
Check this box if the client needs to track paid breaks. - De-Activate Time Clock Import checkbox
Check this box if the client is using a hardware solution and for some reason the time data import process needs to be suspended. - Use Standard Personnel Account Tracking checkbox
Check this box if the client does not need to integrate their employee data with your HR, payroll or PEO system. Otherwise, if this is not checked, your client will have the ability to set-up temporary employees. However all other employee data will be coordinated with the employee data feed process. Unless specifically told to do so, this box should always be checked.
Licensing Options
As of February 1st, 2012, there are new licensing options available to our vendors. Those licensing options are highlighted below.
All Inclusive
If selected, this will provide your clients access to all our modules for a flat per user fee per month. Please note that if you select this licensing option, you must still select which modules you wish activated. This allows you to complete customize the users experience by choosing what modules you wish your client to see.
Ala-Carte
This option allows you to build not only a custom experience by only showing modules you wish your client to see, but also allows you to extend pricing based on what the client will be using.